Eaton easySafety Manual page 137

02/16 MN05013001Z EN
S QS04
Coil function
Coil name
Coil number
j
Ä T 04EN
Coil function
Coil name
(= function block name)
Coil number
Function block coil
Ä TS04TR
Coil function
Coil name
(= function block name)
Coil number
Function block coil
Coils
With a relay coil or a function block, you choose the coil
function, coil name, coil number as well as the function block
coil. With coils of an easyNet station, choose the address
(NET ID) in front of the coil name.
h
The coil number in the figures on the left must be the same
as the function block number!
Example: output QS relay coil in the standard circuit
diagram.
Danger!
Device outputs (QS., QR.) used in the standard circuit
diagram are not safety outputs, and may only be used for
standard tasks. Make sure that these outputs do not
trigger any safety-related actions on the machine or plant.
Example: relay coil for timing relay standard function block
with control coil in the standard circuit diagram.
Example: relay coil for safety timing relay safety function
block with control coil in the safety circuit diagram.
Working with contacts and
relays
133