Eaton easySafety Manual page 344

Standard function blocks
T 01 Ü S
>I1 002,000
>I2 002,000
QV> 0.550
340
Doubling the flashing frequency:
+
Select the power flow display T 01 and change the
X
constant of the setpoint time to 001,000.
When you press OK, the warning light will flash at twice the
frequency.
If the setpoint is a constant, it can also be modified via the
PARAMETERS menu.
h
The actual value is only shown in RUN mode.
02/16 MN05013001Z EN