01/13 Mn05013001Z-Eneasysafety Settings; Password Protection; General Information - Eaton easySafety Manual

02/16 MN05013001Z EN

Password protection

8 easySafety Settings
All easySafety settings can only be carried out on models
provided with buttons and LCD display.
Alternatively use the easySoft-Safety configuration software
to complete all the settings via the software.

General information

Only authorised persons are permitted to access the config-
uration of a safety control relay. The configuration consists
of the safety circuit diagram as well as the necessary device
settings, which have an effect on machine safety.
The access authorisation is protected by password entries.
Passwords are part of each configuration, both in the
easySoft-Safety configuration software as well as in the
device.
The passwords are required when making entries via the
operating buttons of the device in the same way as when
using the easySoft-Safety configuration software, for
(offline) editing and for simulating a configuration or down-
loading one to the device.
h
The passwords that are currently assigned in the configu-
ration software are required for offline editing.
For online access or operating the device directly, the
device is the controlling system. In other words, as soon as
access to a protected menu is required, the passwords of
the device carrying out the examination must be available.
A device can only be accessed without password entry if it is
a new easySafety control relay or a device that has been
restored to its factory settings.
567