Got To A Rung; Deleting Rungs - Eaton easySafety Manual

02/16 MN05013001Z EN
IS01----IS02--u
QS01----HY01Q1k
L: 1 C:1 B:7140
IS01----IS02--u
QS01----HY01Q1k
L: 1 C:1 B:7140

Got to a rung

The GO TO function can be used to go to a different rung.
Press ESC and use cursor buttons
X
menu.
Press OK.
X
Select the required rung (L
X
Always the first contact of the rung is displayed.
Press OK.
X
The cursor stops at the first contact L 1 of the required rung.
h
You can use the "GO TO" function to jump to any rung,
up to the last wired rung.

Deleting rungs

The easySafety device only removes empty rungs (without
contacts or coils).
Delete all contacts and coils from the rung.
X
Position the cursor on the first contact field of the empty
X
rung.
Press DEL.
X
The subsequent rung(s) will be "pulled up" and any existing
links between rungs will be retained.
Working with contacts and
relays
ÍÚ
to select the GO TO
ÍÚ
) with the cursor buttons.
...
141