Eaton easySafety Manual page 223

02/16 MN05013001Z EN
Inputs
The upper and lower limit setpoints are set at function block
inputs >SH and >SL respectively.
The start value is used to cause the function block to count
from a specified offset value.
Parameters Function
Upper setpoint: -2147483648 - +2147483647
>SH
Lower setpoint: -2147483648 - +2147483647
>SL
Start value: -2147483648 - +2147483647
>SV
The function block inputs >SH, >SL and >SV can have the
following operands:
• Constant.
• Markers MD, MW, MB.
• Output QV> of a different function block.
...
Output
Actual value output C..QV supplies the current actual value
as an integer.
Parameters Function
Actual value: -2147483648 - +2147483647
>QV
You can assign the following operands to output
• Markers MD, MW, MB.
C, counter relay
...
QV>:
219