Eaton easySafety Manual page 261

02/16 MN05013001Z EN
Channel
For each year time switch function block, you can configure
the parameters for the A, B, C, and D channels that act
jointly on contact Q1 of this function block.
Parameters Function
Display of the parameters: Channel A
A
Display of the parameters: Channel B
B
Display of the parameters: Channel C
C
Display of the parameters: Channel D
D
Parameter display
The display of the parameters during operation can be disa-
bled. Further information can be found in section "Param-
eter assignment from the standard circuit diagram" on
page 161.
Parameters Function
Parameters are displayed
+
Parameters are not displayed
-
This parameter is factory set to +.
On and off date
Use these parameters to set the data for on and off switching
in the format DD.MM.YY.
For example:
Day.Month.Year: 11.11.07
Parameters Function
On date
>ON
Off date
>OFF
HY, year time switch
257