Eaton easySafety Manual page 591

02/16 MN05013001Z EN
a
SUMMERTIME START
SUMMERTIME END
ON LAST SU
OF MONTH 03
AT 02:00
DIFF: + 1:00
h The same time for conversion applies as for the legally
specified variants for EU.
"EU", "GB" or "US" options
Move to one of the EU, GB or US menus and press OK.
X
Exit the menu with ESC.
X
The time setting is active and the easySafety device switches
to the following times according to these regional presets:
The following applies to the winter h summer time change
with the regional presets EU, GB or US: On the changeover
day the clock will switch from 2:00 to 3:00.
The following applies to the summer h winter time change
with the regional presets EU or GB: On the changeover day
the clock will switch back from 3:00 to 2:00. US: On the
changeover day the clock will switch back from 2:00 to 1:00.
Rule option
h If you create a rule in the rule editor of the easySoft-Safety,
you can access the national time scenarios provided on a
row. These include possible worldwide time scenarios
both for the northern and for the southern hemisphere. In
special cases you can create your own special rules based
on these.
Change to the RULE menu and press OK.
X
Change to the SUMMER TIME START and press OK.
X
The flashing cursor is located in line 1, column 1 on the word
ON.
Press OK gain to move to Entry mode in order to set the
X
changeover day parameters for summer time.
Use cursor buttons
X
and press OK.
Position the cursor in succession with the
X
buttons at the required entry locations and change the
Weekday parameter (SO), Month (OF xx. Month), Time (AT
Changing between winter/
summer time (DST)
Í Ú
or to set day 1 to 4 or the last day
ú í ÍÚ
or
587