Eaton easySafety Manual page 122

02/16 MN05013001Z EN
Wiring with easySafety
Retentive standard markers
You can declare a freely definable contiguous range of
marker bytes within the range MB01-MB96 as retentive. The
table 9 shows how together with these marker bytes MB01-
MB96, also marker words MW01-48 and marker double
words MD01-24 can be declared as retentive.
The remaining marker words MW49-96 and marker double
words MD25-96 cannot be declared as retentive!
The conditions by which the retentive data of a device is
deleted are described in a section "Retention" on
page 597).
118