Yealink SIP-T2 SERIES Administrator's Manual page 548

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
None
ldap.ldap_sort
Description:
Enables or disables the IP phone to sort the search results in alphabetical order or
numerical order.
0-Disabled
1-Enabled
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->LDAP Sorting Results
Phone User Interface:
None
ldap.incoming_call_special_search.enable
Description:
Enables or disables the IP phone to search the telephone numbers starting with ‖+‖
symbol and ―00‖ from the LDAP server if the incoming phone number starts with‖+‖
or ―00‖. When completing the LDAP search, the all search results will be displayed on
the LCD screen.
0-Disabled
1-Enabled
For example,
If the phone receives an incoming call from the phone number 0044123456789, it will
search 0044123456789 from the LDAP sever first, if no result found, it will search
+44123456789 from the server again. The phone will display all the search results.
Note: It works only if the value of the parameter ―ldap.call_in_lookup‖ is set to 1
(Enabled). You may need to set the value of the parameter ―ldap.name_filter‖ to be
(|(cn=%)(sn=%)(telephoneNumber=%)(mobile=%)) for searching the telephone
numbers starting with ‖+‖ symbol. It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
None
Phone User Interface:
None
526
Parameters Permitted Values Default
0 or 1
0 or 1
0
0