Yealink SIP-T2 SERIES Administrator's Manual page 172

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
5) Enter the desired password in the WPA Shared Key field.
6. Tap the Save soft key to accept the change.
Enable page tips feature allows users to enable the page icon and page switch key LED
to indicate different statuses. It is mainly used in the scenario of configuring multi-page
line key. It is only applicable to SIP-T46G/T42G/T41P/T29G/T27P IP phones.
The following table lists the page icons to indicate different statuses:
Phone Models
SIP-T46G/T29G
SIP-T42G/T41P/T27P
Procedure
Enable page tips can be configured using the configuration files or locally.
Configuration File
Local
150
Icons
Fast flashing: the BLF monitored user receives an
incoming call on the non-current page.
1
Solid: there is a parked call to the line on the
non-current page.
Fast flashing: the line receives an incoming call on
1
the non-current page.
Fast flashing:
The BLF monitored user receives an incoming call
on the non-current page.
The line receives an incoming call on the
non-current page.
Solid:
There is a parked call on the non-current page.
<y0000000000xx>.cfg
Web User Interface
Description
Configure enable page tips.
Parameter:
phone_setting.page_tip
Configure enable page tips.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&model=1&q=load&li
nepage=1