Yealink SIP-T2 SERIES Administrator's Manual page 547

Parameters
Directory->LDAP->LDAP Display Name
Phone User Interface:
None
ldap.version
Description:
Configures the LDAP protocol version supported by the IP phone. Make sure the
protocol value corresponds with the version assigned on the LDAP server.
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->Protocol
Phone User Interface:
None
ldap.call_in_lookup
Description:
Enables or disables the IP phone to perform an LDAP search when receiving an
incoming call.
0-Disabled
1-Enabled
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->LDAP Lookup For Incoming Call
Phone User Interface:
None
ldap.call_out_lookup
Description:
Enables or disables the IP phone to perform an LDAP search when placing a call.
0-Disabled
1-Enabled
Note: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
Directory->LDAP->LDAP Lookup For Callout
Phone User Interface:
Configuring Advanced Features
Permitted Values Default
2 or 3
0 or 1
0 or 1
3
0
1
525