Yealink SIP-T2 SERIES Administrator's Manual page 652

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Local
Details of Configuration Parameters:
action_url.setup_completed
Description:
Configures the action URL the IP phone sends after startup.
The value format is: http(s)://IP address of server/help.xml? variable
name=variable value.
Valid variable values are:
$mac

$ip

630
Web User Interface
Parameters
action_url.reject_incoming_call
action_url.answer_new_incoming_c
all
action_url.transfer_finished
action_url.transfer_failed
action_url.setup_autop_finish
action_url.call_waiting_on
action_url.call_waiting_off
action_url.headset
action_url.handfree
action_url.cancel_callout
action_url.remote_busy
action_url.call_remote_canceled
Configure action URL.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T29
G/T27P/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
http://<phoneIPAddress>/servlet?p
=features-actionurl&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-actionurl&
q=load
Permitted Values
URL within 511 characters
Default
Blank