Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
2.
Select the desired level from the pull-down list of System Log Level.
3.
Click Confirm to accept the change.
The system log level is set as 6, the informational level.
Note
Informational level
dial number), we recommend that you reset the system log level to 3 after providing the
syslog file.
Procedure
Log setting can be configured using the configuration files or locally.
Configuration File
Local
886
may make some sensitive information accessible (e.g., password
<y0000000000xx>.cfg
Web User Interface
Configure the syslog mode.
Parameters:
syslog.mode
Configure the syslog mode.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T29G/
T27P/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-config&q=l
oad