Yealink SIP-T2 SERIES Administrator's Manual page 718

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
None
network.vlan.wifi_enable
Description:
Enables or disables manual configuration of VLAN feature in the wireless network for
the IP phone.
0-Disabled
1-Enabled
Note: It works only if the value of the parameter ―wifi.vlan_enable‖ is set to 1
(Enabled). If you change this parameter, the IP phone will reboot to make the
change take effect. It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
None
network.vlan.wifi_vid
Description:
Configures VLAN ID in the wireless network for the IP phone.
Note: It works only if the value of the parameter ―wifi.vlan_enable‖ is set to 1
(Enabled). If you change this parameter, the IP phone will reboot to make the
change take effect. It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
None
network.vlan.wifi_priority
Description:
Configures VLAN priority in the wireless network for the IP phone.
7 is the highest priority, 0 is the lowest priority.
Note: It works only if the value of the parameter ―wifi.vlan_enable‖ is set to 1
(Enabled). If you change this parameter, the IP phone will reboot to make the
change take effect. It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
696
0 or 1
Integer from 1 to 4094
Integer from 0 to 7
0
1
0