Yealink SIP-T2 SERIES Administrator's Manual page 717

3. Enter the desired option in the Option field.
4. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
Yealink IP phones support VLAN in the wireless network. This feature is disabled by
default. The method that the phones use to obtain VLAN in the wireless network is the
same as the one in the wired network. It is only applicable to SIP VP-T49G IP phones.
For more information on wireless network, refer to
Procedure
VLAN can be configured using the configuration files or locally.
Configuration
<y0000000000xx>.cfg
File
Details of the Configuration Parameter:
wifi.vlan_enable
Description:
Enables or disables VLAN discovery feature in the wireless network for the IP phone.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone supports manual configuration of VLAN feature
in the wireless network or automatic discovery of VLAN feature in the wireless
network via LLDP/CDP/DHCP VLAN.
The assignment takes effect in this order: assignment via LLDP/CDP , manual
configuration, then assignment via DHCP .
Note: If you change this parameter, the IP phone will reboot to make the change take
effect. It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
Configuring Advanced Features
Wi-Fi on page 141.
Configure VLAN feature in the wireless
network.
Parameters:
wifi.vlan_enable
network.vlan.wifi_enable
network.vlan.wifi_vid
network.vlan.wifi_priority
0 or 1 0
695