Yealink SIP-T2 SERIES Administrator's Manual page 814

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Local
Details of the Configuration Parameter:
Parameter
voice.handfree_send
Description:
Configures the sending volume of the speaker.
Note: It is not applicable to CP860 IP phones. We recommend that you modify this
parameter cautiously. An unreasonable value may render the voice quality bad. If
you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Features->Audio->Handfree Send Volume (-50~50)
Phone User Interface:
None
voice.handset_send
Description:
Configures the sending volume of the handset.
Note: It is not applicable to CP860 IP phones. We recommend that you modify this
parameter cautiously. An unreasonable value may render the voice quality bad. If
you change this parameter, the IP phone will reboot to make the change take
effect.
792
Web User Interface
Permitted Values
Integer from -50 to 50
Integer from -50 to 50
Configure the sending
volume of the
speaker/handset/headset.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40
P/T29G/T27P/T23P/T23G/T21(P
) E2/T19(P) E2:
http://<phoneIPAddress>/se
rvlet?p=features-audio&q=l
oad
For SIP VP-T49G:
http://<phoneIPAddress>/se
rvlet?m=mod_data&p=feat
ures-audio&q=load
Default
0
0