Yealink SIP-T2 SERIES Administrator's Manual page 215

- Mark the DST by Week radio box in the Fixed Type field.
Select the desired values of DST Start Month, DST Start Week of Month, DST
Start Day of Week, Start Hour of Day; DST Stop Month, DST Stop Week of
Month, DST Stop Day of Week and End Hour of Day from the pull-down lists.
7. Enter the desired offset time in the Offset(minutes) field.
8. Click Confirm to accept the change.
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the
DST is set to Automatic, the IP phone obtains the DST configuration from the AutoDST file.
You can customize the AutoDST file if required. The AutoDST file allows you to add or
modify time zone and DST settings for your area each year.
Before customizing, you need to obtain the AutoDST file. You can ask the distributor or
Yealink FAE for DST template. You can also obtain the DST template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
information on obtaining the template file, refer to
on page
Resource Files
The following table lists description of each element in the template file:
Element Type
DSTData required
DST required
szTime required
szZone required
.
52
Values
no
no
[+/-][X]:[Y], X=0~14, Y=0~59
String (if the content is more
Configuring Basic Features
Obtaining Configuration Files and
Description
File root element
Time Zone item's root
element
Time Zone
Time Zone name
. For more
193