Yealink SIP-T2 SERIES Administrator's Manual page 266

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Parameters
Example:
dialplan.replace.line_id.1 = 1,2
Note: Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P) E2
and CP860 IP phones.
Web User Interface:
Settings->Dial Plan->Replace Rule->Account
Phone User Interface:
None
To create a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Enter the string in the Prefix field.
3. Enter the string in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the replace rule will apply to all accounts on
the IP phone.
5. Click Add to add the replace rule.
The replace rule template helps with the creation of multiple replace rules.
You can ask the distributor or Yealink FAE for replace rule template. You can also obtain
the replace rule template online:
244
Permitted Values Default