Yealink SIP-T2 SERIES Administrator's Manual page 598

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
3. Enter the call pull feature access code (e.g., *11) in the Call Pull Feature Access
Code field.
4. Click Confirm to accept the change.
To configure the private hold soft key via web user interface:
1. Click on Settings->Softkey Layout.
2. Select Enabled from the pull-down list of Custom Softkey.
3. Select On Talk from the pull-down list of Call States.
4. Select Private Hold from the Unselected Softkeys column and then click
The Private Hold appears in the Selected Softkeys (Ordered by position) column.
5.
Click Confirm to accept the change.
576
.