Yealink SIP-T2 SERIES Administrator's Manual page 158

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
To configure the backlight via phone user interface (take SIP-T46G IP phones for
example):
1. Press Menu->Basic->Display->Backlight.
2. Press
Backlight Active Level field.
3. Press
Backlight Inactive Level field.
4. Press
Backlight Time field.
5. Press the Save soft key to accept the change.
You can configure a site name for SIP VP-T49G IP phones. When you make an IP call to
the other party, the site name will be displayed on the far-site display device. Site
names can consist of letters, numbers or special characters.
Procedure
Site name can be configured using the configuration files or locally.
Configuration
File
Local
Details of Configuration Parameters:
setting.site_name
Description:
Configures the site name of the IP phone.
Note: It is only applicable to SIP VP-T49G IP phones.
136
or , or the Switch soft key to select the desired level from the
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the desired time from the
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Parameters
Configure the site name.
Parameters:
setting.site_name
Configure the site name.
Navigate to:
http://<phoneIPAddress>/servlet?m=
mod_data&p=features-general&q=lo
ad
Configure the site name.
Permitted Values
String within 64 characters
Default
Yealink
SIP
VP-T49G