Yealink SIP-T2 SERIES Administrator's Manual page 130

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
To configure the power Indicator LED via web user interface:
1. Click on Features->Power LED.
2. Select the desired value from the pull-down list of Common Power Light On.
3. Select the desired value from the pull-down list of Ringing Power Light Flash.
4. Select the desired value from the pull-down list of Voice/Text Mail Power Light Flash.
5. Select the desired value from the pull-down list of Mute Power Light Flash.
6. Select the desired value from the pull-down list of Hold/Held Power Light Flash.
7. Select the desired value from the pull-down list of Talk/Dial Power Light On.
8. Click Confirm to accept the change.
Notification popups feature allows the IP phone to display the pop-up message when it
misses a call, forwards an incoming call to other party or receives a new voice mail or a
new text message.
Procedure
Notification popups can be configured using the configuration files or locally.
Configuration
File
Local
108
<y0000000000xx>.cfg
Web User Interface
Configure notification popups.
Parameters:
features.voice_mail_popup.enable
features.missed_call_popup.enable
features.forward_call_popup.enable
features.text_message_popup.enable
Configure notification popups.