Yealink SIP-T2 SERIES Administrator's Manual page 169

To enable the Wi-Fi feature via web user interface:
1. Click on Network->Wi-Fi.
2. Select Enabled from the pull-down list of Wi-Fi Active.
3. Click Confirm to accept the change.
To add a wireless network via web user interface:
1. Click on Network->Wi-Fi.
2. Enter the desired value in the Profile Name field.
3. Enter the desired value in the SSID field.
4. Select the desired value from the pull-down list of Secure Mode.
- If you select WEP:
1) Enter the desired password in the PSK field.
- If you select WPA-PSK or WPA2-PSK:
1) Select TKIP, AES or TKIP AES from the pull-down list of the Cipher Type.
Configuring Basic Features
147