Yealink SIP-T2 SERIES Administrator's Manual page 278

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
To configure an area code rule via web user interface:
1. Click on Settings->Dial Plan->Area Code.
2. Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15)
fields.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the area code rule will apply to all accounts
on the IP phone.
4. Click Confirm to accept the change.
Block out rule prevents users from dialing out specific numbers. When entered numbers
match the predefined block out rule, the LCD screen prompts ―Forbidden Number‖. IP
phones support up to 10 block out rules.
Procedure
Block out rule can be created using the configuration files or locally.
Configuration File
Local
256
<y0000000000xx>.cfg
Web User Interface
Create the block out rule for the
IP phone.
Parameters:
dialplan.block_out.number.X
dialplan.block_out.line_id.X
Create the block out rule for the
IP phone.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T2
9G/T27P/T23P/T23G/T21(P)
E2/T19(P) E2/CP860:
http://<phoneIPAddress>/servlet