Yealink SIP-T2 SERIES Administrator's Manual page 912

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Parameters
1-Server
2-FTP/TFTP Server
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Export System Log
Phone User Interface:
None
syslog.server
Description:
Configures the IP address or domain name of the syslog server when exporting log
to the syslog server.
Example:
syslog.server = 192.168.1.100
Note: It works only if the value of the parameter ―syslog.mode‖ is set to 1 (Server).
If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Settings->Configuration->Server Name
Phone User Interface:
None
To configure the phone to export the system log to a syslog server via web user
interface:
1. Click on Settings->Configuration.
2. Mark the Server radio box in the Export System Log field.
3. Enter the IP address or domain name of the syslog server in the Server Name field.
890
Permitted Values
IP address or
domain name
Default
Blank