Yealink SIP-T2 SERIES Administrator's Manual page 129

None
phone_setting.hold_and_held_power_led_flash_enable
Description:
Enables or disables the power indicator LED to flash when a call is placed on hold or is
held.
For SIP VP-T49G/SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP
phones:
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED does not flash)
1-Enabled ( power indicator LED fast flashes (500ms) yellow)
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->Power LED->Hold/Held Power Light Flash
Phone User Interface:
None
phone_setting.talk_and_dial_power_led_enable
Description:
Enables or disables the power indicator LED to be turned on when the IP phone is
busy.
For SIP VP-T49G/SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP
phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid yellow)
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->Power LED->Talk/Dial Power Light On
Phone User Interface:
None
Parameters
Configuring Basic Features
Permitted
Default
Values
0 or 1 0
0 or 1 0
107