Yealink SIP-T2 SERIES Administrator's Manual page 906

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
3: error conditions
4: warning conditions
5: normal but significant condition
6: informational
syslog.mode – Specify the system log to be exported to the provisioning server,

syslog server or local system.
syslog.server -- Specify the IP address or domain name of the syslog server to

which the log will be exported.
syslog.log_upload_period - Specify the period of the log upload (in seconds) to the

provisioning server.
syslog.ftp.post_mode - Specify whether the log files on the provisioning server are

overwritten or appended.
syslog.ftp.max_logfile - Specify the maximum size of the log files on the

provisioning server.
syslog.ftp.append_limit_mode - Specify the phone to stop log upload or delete the

old lod when the log on the provisioning server reaches the max size.
syslog.bootlog_upload_wait_time - Specify the waiting time before the phone

uploads the log file to the provisioning server.
auto_provision.server.url - Specify the access URL of the syslog server or

provisioning server.
Procedure
Severity level can be configured using the configuration files or locally.
Configuration File
Local
884
<y0000000000xx>.cfg
Web User Interface
Configure the severity level of the
logs to be reported to a log file.
Parameters:
syslog.log_level
Configure the severity level of the
logs to be reported to a log file.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T29G/
T27P/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-config&q=l