Yealink SIP-T2 SERIES Administrator's Manual page 526

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
called), for example, 20150731-1630-Mishoel.JPG was created on July 31, 2015, at 16:30
and you have a call with Mishoel. Screenshot can be viewed on either the phone itself
or on a computer using an application capable of viewing *.JPG files. For more
information, refer to
Yealink IP phones also support capturing the screen display of the IP phone using the
action URI. For more information, refer to
the Phone on page 653.
Note
If the call is audio-only, you cannot capture the screenshot using USB flash drive.
Procedure
Screenshot feature can be only configured using the configuration files.
Configuration File
Details of Configuration Parameters:
features.screenshot.enable
Description:
Enables or disables the screenshot feature for the IP phone.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), you can capture screenshots by tapping the Screenshot soft
key or pressing the MESSAGE key during a video call, and the captured screenshots
will be saved to the USB flash drive.
If it is set to 0 (Disabled), you can only capture screenshots by pressing the
MESSAGE key during a video call.
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
None
Recording feature allows users to record active calls (audio calls or video calls) or
504
Yealink_SIP_VP-T49G_User_Guide.
<y0000000000xx>.cfg
Parameter
Scenario A - Capturing the Current Screen of
Configure the screenshot feature.
Parameter:
features.screenshot.enable
Permitted Values
0 or 1
Default
1