Yealink SIP-T2 SERIES Administrator's Manual page 118

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Details of Configuration Parameters:
auto_provision.power_on
Description:
Triggers the power on feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process when
powered on.
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
auto_provision.repeat.enable
Description:
Triggers the repeatedly feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will perform an auto provisioning process
repeatedly.
Web User Interface:
Settings->Auto Provision->Repeatedly
Phone User Interface:
None
auto_provision.repeat.minutes
Description:
Configures the interval (in minutes) for the IP phone to perform an auto provisioning
process repeatedly.
Note: It works only if the value of the parameter ―auto_provision.repeat.enable‖ is
set to 1 (On).
Web User Interface:
Settings->Auto Provision->Interval(Minutes)
96
Parameters Permitted Values
0 or 1
0 or 1
Integer from 1 to 43200
Default
1
0
1440