Yealink SIP-T2 SERIES Administrator's Manual page 73

account.X.timeout_fwd.timeout =
account.X.timeout_fwd.on_code =
account.X.timeout_fwd.off_code =
#Configure DND feature for account X. (It is not applicable to SIP-T19(P) E2 and
CP860 IP phones. X stands for the serial number of account)
account.X.dnd.enable =
account.X.dnd.on_code =
account.X.dnd.off_code =
#Configure the access URL of the firmware file.
firmware.url =
#Configure the access URL of configuration files.
auto_provision.server.url=
The following configurations are defined to be bundled together. If a user modifies one
of the configurations in a group via web user interface and phone user interface, the
other configurations in this group can also be saved to the <MAC>-local.cfg file (if the
configuration value is blank, write ‖%NULL%‖ into the configuration) in addition to the
modified configuration.
#Group1: Configure line key. (Line key is not applicable to SIP-T19(P) E2 and CP860 IP
phones. X stands for the serial number of line key)
linekey.X.line =
linekey.X.value =
linekey.X.pickup_value =
linekey.X.type =
linekey.X.xml_phonebook =
linekey.X.label =
#Group2: Configure programable key. (X stands for the serial number of programable
key)
programablekey.X.type =
programablekey.X.line =
programablekey.X.value =
programablekey.X.xml_phonebook =
programablekey.X.history_type =
programablekey.X.label =
#Group3: Configure expansion module key. (Expansion module key is only applicable
to the SIP-T48G/T46G/T29G/T27P IP phones. X stands for the serial number of expansion
module, Y stands for the serial number of expansion key)
expansion_module.X.key.Y.type =
expansion_module.X.key.Y.line =
Getting Started
51