Yealink SIP-T2 SERIES Administrator's Manual page 710

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
VLAN is disabled on IP phones by default. You can configure VLAN for the Internet port
and PC port manually. For CP860 IP phones, you can only configure VLAN for the Internet
port manually, because they only have Internet port. Before configuring VLAN on the IP
phone, you need to obtain the VLAN ID from your network administrator.
Procedure
VLAN can be configured using the configuration files or locally.
Configuration
File
Local
688
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Configure VLAN for the Internet port
and PC port manually.
Parameters:
network.vlan.internet_port_enable
network.vlan.internet_port_vid
network.vlan.internet_port_priority
network.vlan.pc_port_enable
network.vlan.pc_port_vid
network.vlan.pc_port_priority
Configure VLAN for the Internet port
and PC port manually.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T29G/T
27P/T23P/T23G/T21(P) E2/T19(P)
E2/CP860:
http://<phoneIPAddress>/servlet?p=n
etwork-adv&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet?m=
mod_data&p=network-adv&q=load
Configure VLAN for the Internet port
and PC port manually.