Yealink SIP-T2 SERIES Administrator's Manual page 193

Local
Details of Configuration Parameters:
Parameters
phone_setting.contact_photo_display.enable
Description:
Enables or disables the IP phone to display contact avatar when it receives an
incoming call, dials an outgoing call or engages in a call.
0-Disabled
1-Enabled
Note: It is only applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP phones.
Web User Interface:
Settings->Call Display->Display Contact Photo
Phone User Interface:
None
phone_setting.called_party_info_display.enable
Web User Interface
Configuring Basic Features
phone_setting.called_party_inf
o_display.enable
Specify the call information
display method.
Parameter:
phone_setting.call_info_display
_method
Configure call display features.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T
29G/T27P/T23P/T23G/T21(P)
E2/T19(P) E2/CP860:
http://<phoneIPAddress>/servl
et?p=settings-calldisplay&q=lo
ad
For SIP VP-T49G:
http://<phoneIPAddress>/servl
et?m=mod_data&p=settings-c
alldisplay&q=load
Permitted Values
0 or 1
0 or 1
Default
1
0
171