Yealink SIP-T2 SERIES Administrator's Manual page 406

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Multiple numbers are separated by commas.
4. Click Confirm to accept the change.
To configure call forward via web user interface:
1. Click on Features->Forward&DND.
2. In the Forward block, mark the desired radio box in the Mode field.
a) If you mark the Phone radio box:
1) Mark the desired radio box in the Always/Busy/No Answer Forward field.
2) Enter the destination number you want to forward in the Target field.
3) (Optional.) Enter the on code and off code in the On Code and Off Code
fields.
4) Select the ring time to wait before forwarding from the pull-down list of
After Ring Time(0~120s) (only for the no answer forward).
b) If you mark the Custom radio box:
1) Select the desired account from the pull-down list of Account.
2) Mark the desired radio box in the Always/Busy/No Answer Forward field.
3) Enter the destination number you want to forward in the Target field.
4) Enter the on code and off code in the On Code and Off Code fields.
5) Select the ring time to wait before forwarding from the pull-down list of
384