Yealink SIP-T2 SERIES Administrator's Manual page 332

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
To configure auto answer tone via web user interface:
1. Click on Features->General Information.
2. Select the desired value in the pull-down list of Enable auto answer tone.
3. Click Confirm to accept the change.
To configure auto answer via phone user interface (take SIP-T23G IP phones for
example):
1. Press Menu->Features->Auto Answer.
2. Press
field.
3. Press
field.
4. Press the Save soft key to accept the change.
To configure auto answer via phone user interface (take SIP-T46G IP phones for
example):
1. Press Menu->Features->Auto Answer.
2. Select the desired line.
3. Press
Answer field.
4. Press the Save soft key to accept the change.
To configure auto answer via phone user interface (take SIP-T48G IP phones for
example):
1. Tap ->Features->Auto Answer.
2. Tap the On radio box in the desired line.
3. Tap the Save soft key to accept the change.
310
or , or the Switch soft key to select the desired value from the Line ID
or , or the Switch soft key to select the desired value from the Status
or , or the Switch soft key to select the desired value from the Auto