Yealink SIP-T2 SERIES Administrator's Manual page 194

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Description:
Enables or disables the IP phone to display the called account information when
receiving an incoming call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Call Display->Display Called Party Information
Phone User Interface:
None
phone_setting.call_info_display_method
Description:
Specifies the call information display method when the IP phone receives an
incoming call, dials an outgoing call or is during an active call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
Web User Interface:
Settings->Call Display->Call Information Display Method
Phone User Interface:
None
To configure call display features via web user interface (take SIP-T23G IP phones for
example):
1. Click on Settings->Call Display.
2. Select the desired value from the pull-down list of Display Called Party Information.
172
Parameters Permitted Values Default
0, 1, 2, 3 or 4 0