If SIP INFO or RFC2833 + SIP INFO is selected, select the desired value from the
pull-down list of DTMF Info Type.
4.
Enter the desired value in the DTMF Payload Type(96~127) field.
5.
Click Confirm to accept the change.
To configure the method of transmitting DTMF digits for IP call via web user interface
(take SIP VP-T49G IP phones for example):
1.
Click on Account->SIP IP Call.
2.
Select the desired value from the pull-down list of DTMF Type.
3.
Select the desired value from the pull-down list of DTMF Info Type.
It is configurable only if DTMF Type field is set to SIP Info or RFC2833+SIP Info.
4.
Select the desired value from the pull-down list of DTMF Payload Type(96-127).
5.
Click Confirm to accept the change.
To configure the number of times to send the end RTP Event packet via web user
interface:
1.
Click on Features->General Information.
Configuring Basic Features
463