Yealink SIP-T2 SERIES Administrator's Manual page 919

Parameters
Phone User Interface:
None
syslog.bootlog_upload_wait_time
Description:
Configures the waiting time (in seconds) before the phone uploads the log file to
the provisioning server.
Example:
syslog.bootlog_upload_wait_time = 121
Note: It works only if the value of the parameter ―syslog.mode‖ is set to 2 (FTP/TFTP
Server). If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
None
Phone User Interface:
None
auto_provision.server.url
Description:
Configures the access URL of the provisioning server.
Example:
auto_provision.server.url = tftp://10.3.6.133/
Web User Interface:
Settings->Auto Provision->Server URL
Phone User Interface:
None
To configure the URL of the provisioning server via web user interface:
1. Click on Settings->Auto Provision.
2. Enter the URL of the FTP/TFTP server in the Server URL field.
Permitted Values
Integer from 1 to
86400
URL within 511
characters
Troubleshooting
Default
120
Blank
897