Yealink SIP-T2 SERIES Administrator's Manual page 305

This scenario is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Scenario Conditions I (only applicable to SIP VP-T49G IP phones):
Provisioning server URL: tftp://192.168.10.25.

The custom avatars and icons: ―cutom1.jpg‖ and ―cutom2.png‖. They are all

uploaded to the provisioning server in advance.
Scenario Conditions II:
Provisioning server URL: tftp://192.168.10.25.

The custom avatars: ―cutom1.jpg‖ and ―cutom2.png‖. They are compressed as a

tar formatted file (photo1.tar).
The custom icons: ―cutom1.jpg‖ and ―cutom2.png‖. They are compressed as a tar

formatted file (photo2.tar).
For more information on generating a tar formatted file, refer to
Formatted File
Note
The custom avatar and icon can be different, but make sure the icon name is the same
as avatar name.
To customize a local contact file:
1. Open the template file using an ASCII editor.
2. For each group that you want to add, add the following string to the file. Each starts
on a separate line:
<group display_name="" ring=""/>
3. For each contact that you want to add, add the following string to the file. Each
starts on a separate line:
<contact display_name="" office_number="" mobile_number="" other_number=""
line="" ring="" group_id_name="" default_photo=""/>
4. Specify the values within double quotes.
For example:
<group display_name="Friend" ring="Resource:Splash.wav"/>
<contact display_name="Lily" office_number="1020" mobile_number="1021"
other_number="1112" line="1,2" ring="Resource:Ring1.wav"
group_id_name="Friend" default_photo="Config:cutom1.jpg"/>
on page 279.
Configuring Basic Features
Preparing the Tar
283