Yealink SIP-T2 SERIES Administrator's Manual page 556

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
<identity>sip:1010@10.2.1.48:5060</identity>
<target uri="sip:1010@10.2.1.48:5060"/>
</remote>
</dialog>
</dialog-info>
Visual Alert and Audio Alert for BLF Pickup
Visual and audio alert for BLF pickup allow the supervisor's phone to play an alert tone
and display a visual prompt (e.g., ―6001<-6002‖, 6001 is the monitored extension which
receives an incoming call from 6002) when the monitored user receives an incoming call.
In addition to the BLF key, visual alert for BLF pickup feature enables the supervisor to
pick up the monitored user's incoming call by pressing the DPickup soft key. The
directed call pickup code must be configured in advance. For more information on how
to configure the directed call pickup code for the DPickup soft key, refer to
Pickup on page 398.
BLF LED Mode
BLF LED Mode provides five kinds of definition for the BLF/BLF List key LED status. As
there is no hard line key on SIP VP-T49G and SIP-T48G IP phones, BLF LED mode
configuration is only applicable to SIP-T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P)
E2 IP phones. BLF LED mode is also applicable to the expansion module EXP40
connected to SIP-T48G/T46G IP phones, EXP20 connected to SIP-T29G and SIP-T27P IP
phones. The following table lists the LED statuses of the BLF key when BLF LED Mode is
set to 0, 1, 2, 3 or 4 respectively. The default value of BLF LED mode is 0.
BLF LED mode feature is also applicable to BLF list key. For more information on BLF List
key, refer to BLF List
Line key/Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF
LED Mode is set to 0)
LED Status
Solid green
Fast flashing red (200ms)
Solid red
Slow flashing red (1s)
Off
534
on page 545.
The monitored user is idle.
The monitored user receives an incoming call.
The monitored user is dialing.
The monitored user is talking.
The monitored user's conversation is placed on hold
(This LED status requires server support).
The call is parked against the monitored user's phone
number.
The monitored user does not exist.
Description
Directed Call