Yealink SIP-T2 SERIES Administrator's Manual page 79

For more information on how to configure these parameters in different scenarios, refer
to the following introduced scenarios.
The administrator wishes to upgrade firmware from the old version to the latest version.
Meanwhile, keep user personalized settings after auto provisioning and upgrade. This
scenario is only applicable to SIP-T48G/T46G/T42G/T41P IP phones.
Scenario Conditions:
The current firmware version of the SIP-T46G IP phone is 28.71.0.181. This firmware

version does not support keeping user personalized settings and generating a
<MAC>-local.cfg file.
The target firmware version of the SIP-T46G IP phone is 28.80.0.60. This firmware

version supports keeping user personalized settings after auto provisioning or
upgrade.
The MAC address of the SIP-T46G IP phone: 001565221229

Provisioning server URL: tftp://192.168.1.211

Place the target firmware to the root directory of the provisioning server.

Create a new directory "ProvisioningDir_new" under the root directory of the

provisioning server.
Note
The IP phone with old firmware does not support
after auto provisioning and upgrade. You can configure the value of the parameter
―auto_provision.custom.protect‖ to 1 in the configuration file to keep user personalized
settings after auto provisioning and upgrade.
Do the following operations:
1. Place the configuration files (y000000000028.cfg and 001565221229.cfg) that you
want the IP phone to download to the new directory ―ProvisioningDir_new‖ of the
provisioning server.
2. Add/Edit the following parameter in the y000000000028.cfg file or 001565221229.cfg
file you want the IP phone to download:
auto_provision.custom.protect = 1
3. Create a blank configuration file ―y000000000028.cfg‖ on the root directory of the
keeping user
personalized settings
Getting Started
57