Yealink SIP-T2 SERIES Administrator's Manual page 506

Hide thumbs Also See for SIP-T2 SERIES:

Table of Contents

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones

Account->Advanced->Send user=phone

Phone User Interface:

To configure send user=phone feature via web user interface:

Click on Account->Advanced.

Select the desired account from the pull-down list of Account.

Select the desired value from the pull-down list of Send user=phone.

Click Confirm to accept the change.

The IP phone can send the MAC address in the REGISTER message. SIP send MAC allow

adding ―Mac:<PhoneMACAddress>‖ (e.g., Mac: 00:15:65:74:b1:50) to the SIP header

of the REGISTER message.

Example of a SIP REGISTER message:

Via: SIP/2.0/UDP 10.3.20.14:5060;branch=z9hG4bK3593117201

From: "11" <sip:11@10.2.1.48:5060>;tag=2788360609

To: "11" <sip:11@10.2.1.48:5060>

Permitted Values