Yealink SIP-T2 SERIES Administrator's Manual page 528

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
1-Enabled
If it is set to 1 (Enabled), you can record the audio or video call by tapping the
Record soft key during a call, and the recorded calls or videos will be saved to the
USB flash drive.
Note: It is only applicable to SIP VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
None
You can record active calls and conferences on your CP860 IP phone after you insert a
USB flash drive into the USB port on the phone.
The recorded calls are saved in *.wav format and include a date/time stamp, the other
party's number/IP address/name (or the first person's number/IP address/name you
called), duration of the call and the recording file size. For example, 20150911-1542-Bob
00:00:06(198.2KB) was created on Sep. 11, 2015, at 15:42 and you have a call with Bob,
the duration of the call is 6 seconds and the size of the file is 198.2KB. Recorded calls can
be played on either the phone itself or on a computer using an application capable of
playing *.wav files.
For more information, refer to
External Monitor feature allows IP phone to present the video images captured from
camera (both near site and far site) on one external monitor during a video call. It is
helpful for the user to have a clearer view of the far-site video image. The video layout
on the external monitor will be synchronous with that on the phone. If the phone is not in
an active video call, the external monitor will only display a Yealink logo.
To use this feature, ensure that the external monitor has been connected to the HDMI
port of the phone. It is only applicable to SIP VP-T49G IP phones.
506
Parameter
Yealink_CP860_User_Guide.
Permitted Values Default