Yealink SIP-T2 SERIES Administrator's Manual page 312

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
2. In the Directory block, enter the name and the office, mobile or other numbers in the
corresponding fields.
3. Select the desired ring tone from the pull-down list of Ring Tone.
4. Select the desired group from the pull-down list of Group.
5. Select the desired account from the pull-down list of Account.
If Auto is selected, the IP phone will use the default account when placing calls to
the contact from the local directory.
6. Click Add to add the contact.
To add a group to the local directory via phone user interface:
1. Press Menu->Directory->Local Directory.
2. Press the AddGr soft key.
3. Enter the desired group name in the Name field.
4. Press
the Ring field.
5. Press the Add soft key to accept the change.
To import an XML contact list file via web user interface:
1. Click on Directory->Local Directory.
290
or , or the Switch soft key to select the desired group ring tone from