Yealink SIP-T2 SERIES Administrator's Manual page 273

2. Enter the desired time within 0-14 (in seconds) in the Time-Out for Dial-Now Rule
field.
3. Click Confirm to accept the change.
The dial-now template helps with the creation of multiple dial-now rules. After setup,
place the dial-now template to the provisioning server and specify the access URL in the
configuration files.
You can ask the distributor or Yealink FAE for dial-now template. You can also obtain the
dial-now template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
information on obtaining the dial-now template, refer to
on page
and Resource Files
When editing a dial-now template, learn the following:
<DialNow> indicates the start of a template and </DialNow> indicates the end of

a template.
When specifying the desired line(s) for the dial-now rule, the valid values are 0 and

line ID. Multiple line IDs are separated by commas. It is not applicable to SIP-T19(P)
E2 and CP860 IP phones.
.
52
Configuring Basic Features
. For more
Obtaining Configuration Files
251