Yealink SIP-T2 SERIES Administrator's Manual page 322

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
2. Enter the desired value in the Redial Tone field.
3. Click Confirm to accept the change.
The IP phones support either or both speaker and headset ringer devices. Ringer Device
for Headset feature allows users to configure which ringer device to be used when
receiving an incoming call. For example, if the ringer device is set to Headset, ring tone
will be played through your headset.
If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired
headset or Bluetooth headset) should be connected to the IP phone and the headset
mode also should be activated in advance. You can press the HEADSET key to activate
the headset mode. For more information, refer to the
Note
It is not applicable to CP860 IP phones.
Procedure
Ringer device for headset can be configured using the configuration files or locally.
Configuration File
Local
300
<y0000000000xx>.cfg
Web User Interface
Yealink phone-specific user guide
Configure the ringer device for
the IP phone.
Parameters:
features.ringer_device.is_use_he
adset
Configure the ringer device for
the IP phone.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T2
.