Yealink SIP-T2 SERIES Administrator's Manual page 245

Details of Configuration Parameters:
Parameters
phone_setting.lcd_logo.mode
Description:
Configures the logo mode of the LCD screen.
0-Off
1-System logo
2-Custom logo
If it is set to 0 (Off), the IP phone is not allowed to display a logo.
If it is set to 1 (System logo), the LCD screen will display the system logo.
If it is set to 2 (Custom logo), the LCD screen will display the custom logo (you need
to upload a custom logo file to the IP phone).
Note: It is not applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP phones.
Web User Interface:
Features->General Information->Use Logo
Phone User Interface:
None
lcd_logo.url
Description:
Configures the access URL of the custom logo file.
Example:
lcd_logo.url = http://192.168.10.25/logo.dob
During the auto provisioning process, the IP phone connects to the provisioning
server ―192.168.10.25‖, and downloads the custom logo file ―logo.dob‖.
Note: It works only if the value of the parameter ―phone_setting.lcd_logo.mode‖ is
set to 2 (Custom logo). It is not applicable to SIP VP-T49G/SIP-T48G/T46G/T29G IP
phones.
Web User Interface:
Features->General Information->Upload Logo
Phone User Interface:
None
lcd_logo.delete
Permitted Values
0, 1 or 2
URL within 511
characters
http://localhost/all
Configuring Basic Features
Default
0
Blank
Blank
223