Yealink SIP-T2 SERIES Administrator's Manual page 810

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Local
Details of the Configuration Parameter:
Parameter
features.headset_prior
Description:
Enables or disables headset prior feature. You need to press the HEADSET key to
activate the headset mode in advance.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the headset mode will not be deactivated until the user
presses the HEADSET key again.
If it is set to 0 (Disabled), the headset mode can be deactivated by pressing the
Speakerphone key or the HEADSET key except the HANDSET key.
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->General Information->Headset Prior
Phone User Interface:
None
To configure headset prior via web user interface:
1. Click on Features->General Information.
788
Web User Interface
Permitted Values
0 or 1
Configure headset prior.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40
P/T29G/T27P/T23P/T23G/T21(P
) E2/T19(P) E2:
http://<phoneIPAddress>/ser
vlet?p=features-general&q=
load
For SIP VP-T49G:
http://<phoneIPAddress>/ser
vlet?m=mod_data&p=featur
es-general&q=load
Default
0