Yealink SIP-T2 SERIES Administrator's Manual page 157

2. Select the desired value from the pull-down list of Backlight Time(seconds).
3. Click Confirm to accept the change.
To configure backlight via phone user interface (take SIP-T23G IP phones for example):
1. Press Menu->Settings->Basic Settings->Display->Backlight.
2. Press or
Backlight Time field.
3. Press the Save soft key to accept the change.
To configure the backlight via web user interface (take SIP-T46G IP phones for example):
1. Click on Settings->Preference.
2. Select the desired value from the pull-down list of Backlight Inactive Level.
3. Select the desired value from the pull-down list of Backlight Active Level.
4. Select the desired value from the pull-down list of Backlight Time(seconds).
5. Click Confirm to accept the change.
, or the Switch soft key to select the desired value from the
Configuring Basic Features
135