Yealink SIP-T2 SERIES Administrator's Manual page 267

http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
information on obtaining the replace rule template, refer to
on page
and Resource Files
When editing a replace rule template file, learn the following:
<DialRule> indicates the start of the template file and </DialRule> indicates the

end of the template file.
When specifying the desired line(s) to apply the replace rule, the valid values are 0

and line ID. Multiple line IDs are separated by commas. It is not applicable to
SIP-T19(P) E2 and CP860 IP phones.
The following table lists valid values of line ID for each phone model.
Phone Model
SIP
VP-T49G/SIP-T48G/T46G/
T29G
SIP-T42G
SIP-T41P/T27P
SIP-T40P/T23P/T23G
SIP-T21(P) E2
At most 100 replace rules can be added to the IP phone.

The expression syntax in the replace rule template is the same as that introduced in
the section Dial Plan
To customize a replace rule template:
1. Open the template file using an ASCII editor.
2. Create replace rules between <DialRule> and </DialRule>.
.
52
Values
0 stands for all lines
0~16
1~16 stand for line1~line16
0 stands for all lines
0~12
1~12 stand for line1~line12
0 stands for all lines
0~6
1~6 stand for line1~line6
0 stands for all lines
0~3
1~3 stand for line1~line3
0 stands for all lines
0~2
1~2 stand for line1~line2
on page 241.
Configuring Basic Features
. For more
Obtaining Configuration Files
Description
245