Yealink SIP-T2 SERIES Administrator's Manual page 342

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Procedure
Call completion can be configured using the configuration files or locally.
Configuration File
Local
Details of the Configuration Parameter:
features.call_completion_enable
Description:
Enables or disables call completion feature. If a user places a call and the callee is
temporarily unavailable to answer the call, call completion feature allows notifying
the user when the callee becomes available to receive a call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the caller is notified when the callee becomes available to
receive a call.
Web User Interface:
Features->General Information->Call Completion
Phone User Interface:
Menu->Features->Call Completion->Call Completion
320
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Parameter
Configure call completion.
Parameter:
features.call_completion_enable
Configure call completion.
Navigate to:
For
SIP-T48G/T46G/T42G/T41P/T40P/T2
9G/T27P/T23P/T23G/T21(P)
E2/T19(P) E2/CP860:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet
?m=mod_data&p=features-gene
ral&q=load
Configure call completion.
Permitted Values
0 or 1
Default
0