Yealink SIP-T2 SERIES Administrator's Manual page 149

Web User Interface:
Settings->Power Saving->Off Hour Idle TimeOut
Phone User Interface:
None
features.power_saving.user_input_ext.idle_timeout
Description:
Configures the time (in minutes) to wait in the idle state before IP phone enters
power-saving mode when using the IP phone (for example, press a key on the
phone, pick up/hang up the handset or tap the touch screen (only applicable to
SIP-T48G)).
Note: If you use the IP phone, the idle timeout that applies (User input extension Idle
Timeout or Office Hours/Off Hours Idle Timeout) is the timeout with the highest value.
If the phone has an incoming call or message, the User input extension Idle Timeout
is ignored. It is only applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones.
Web User Interface:
Settings->Power Saving->User input extension Idle TimeOut
Phone User Interface:
None
features.power_saving.office_hour.monday
Description:
Configures the starting time and duration of the day's office hour on Monday.
Starting time and duration are separated by a comma.
Note: It is only applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones.
Web User Interface:
Settings->Power Saving->Monday
Phone User Interface:
None
features.power_saving.office_hour.tuesday
Description:
Configures the starting time and duration of the day's office hour on Tuesday.
Starting time and duration are separated by a comma.
Note: It is only applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones.
Configuring Basic Features
Integer from 1 to
20
Integer from 0 to
23, Integer from
0 to 23
Integer from 0 to
23, Integer from
0 to 23
10
7,12
7,12
127